Our project was inspired by the books that little kids play with where they can change the different body parts of characters and attach them to other characters. For this project we created a digital version of this book. There are three wheels that each correspond to moving the head, torso, or legs of different […]
Jen, Thu, Katie, Taswar Mix-n-Match
Our project was inspired by the books that little kids play with where they can change the different body parts of characters and attach them to other characters. For this project we created a digital version of this book. There are three wheels that each correspond to the head, torso, or legs of different […]
Jen, Thu, Katie, Taswar Crossing Gap
Project: Our task was to build a robot that could cross a gap between two tables without any human effort. We had to make the robot and develop the code in class with a certain time constraint. Structure: Our idea for this project was to use rotating tires on either side of the […]
Jen, Thu, Katie, and Taswar Haunted House
Project: There are three parts to this project, all initiated with a push of a touch sensor. The first part includes a hand inside a jack-o-lantern bucket. When the button is pressed, the hand would reach out with little spiders and spider webs in it. Then it would come back down and reset […]
Jen and Thu Magic Trick
Design: For this project, we created a dog that performs a magic trick. The trick is that the dog “eats” a yellow ribbon, magically transforms it into a green ribbon, and then spits out the green ribbon. How it works: We had two motors, one medium motor at the back that would wheel […]
Jen and Thu Astronaut Tool
Task: Move nuts between bolts Design: Our design consist of one motor and a touch sensor, both of which are only attached to one side of the brick to allow space for the user to maneuver the tool with whatever hand they are using. The motor is connected to an axle that holds […]
Jen and Thu Ultrasonic
https://docs.google.com/document/d/1MYA7hV5_ZJKBupc2vwp-2ogui9xOLnul8P1xEBZSEHI/edit?usp=sharing Here is the link to our lab report. Ultrasonic Sensor Investigation – Google Docs
Jen and Thu
The robotic dog we created walks forward when someone touches its nose and it wags its tail when someone comes close to pet it. A touch sensor is the input that acts as the “nose” of the dog. The two motors on the side that act like dog’s legs they are the output that react […]